CORIOmaster & CORIOgrapher Help
Getting started with CORIOgrapher™
When you first open CORIOgrapher, you see the Home window.
- If you've set up your hardware already, you can connect to your
- If you haven't set up your hardware yet, you can create a configuration offline, or, if you have one, you can load a configuration from a file. You can save your configuration, and send the configuration to your CORIOmaster later. You can also use saved configurations to configure other CORIOmaster units.
Read about setting up hardware
The easiest way to get started using CORIOgrapher is to get the configuration of inputs and outputs directly from your CORIOmaster.
-
From Home, select your CORIOmaster from Discovered Devices.
If your CORIOmaster isn't in the list, select Refresh.
-
Enter your administrator login details.
When you first log in as an administrator, enter the username admin and password adminpw. Leave the Secure option clear.
-
When you have logged in to your CORIOmaster, select Read to get its configuration.
You can now name your input and output ports.
You can communicate securely with your CORIOmaster. To use secure mode, enable secure mode.
Read about enabling secure mode
When secure mode is active, on Home you can see 
next to the name of the CORIOmaster.
You don't need to be connected to a CORIOmaster to create
You can also create offline configurations to help you decide what hardware you need.
- From Home, select Create an Offline Configuration.
- On the Configuration Editor window, choose a device, and give your configuration a name.
-
For each slot, choose an input or output module from the list.
- The number of slots available depends on your device.
- You don't have to use all the slots.
- If you are creating a configuration for an existing CORIOmaster, match your configuration to the modules of your CORIOmaster.
-
If you are creating a configuration to help you decide what modules you need, there are some guidelines on where to put your modules.
You can send a configuration to your CORIOmaster from Home. You can either create a configuration offline, or load a saved configuration.
- Create or load a configuration.
-
Select Connect to your device and enter your administrator login details.
When you first log in as an administrator, enter the username admin and password adminpw.
- Select Send.