CORIOmaster & CORIOgrapher Help
Playing independent audio with a CORIOmaster micro™
Your CORIOmaster micro can play independent audio. Connect the S/PDIF port of your CORIOmaster micro to a digital audio device, with an RCA cable. You can control what you hear from the S/PDIF output with the buttons of the front panel.
Embedded audio and independent audio can play at the same time.
Your CORIOmaster micro can also play embedded audio. Control embedded audio with CORIOgrapher.
Read about playing embedded audio
Audio settings are set for sources, not windows. If you adjust or mute the audio from a window, all the windows playing that source are affected.
- Your CORIOmaster micro has an S/PDIF audio output that you can connect to a digital audio device with an RCA cable.
- You can listen to a source playing in a window. The window you hear is the active window. You can choose which window is active with the buttons of the front panel. In CORIOgrapher > Wall Editor, the active window shows .
-
You can mute and adjust the input audio level of individual sources playing in windows in CORIOgrapher™.
-
You can mute the audio output in CORIOgrapher.
-
The Streaming media and 4K playback input module only supports the following embedded audio formats:
- mp3
- aac
You can choose which window to hear with the buttons on your CORIOmaster micro. By default, the eight buttons correspond to your first eight sources. You can configure your buttons to correspond with your choice of windows.
You can choose to hear any window, including windows that aren't showing on your video wall, or are on a different canvas.
In this example, window 3 is not showing on the video wall, but you can still choose to hear the audio from window 3. Note that window 3 is a preview window to reduce video bandwidth.
- Press and hold the button that corresponds to the window you want to hear, until it flashes red.
You can choose which window to hear in CORIOgrapher.
- From the wall editor, select Audio.
-
Select a window to hear from Audio Follows.
For each source, you can mute, unmute, and adjust the input audio level in CORIOgrapher.
Audio settings are set for sources, not windows. If you adjust or mute the audio from a window, all the windows playing that source are affected.
Adjusting input audio level and muting using source properties
- Double-click any window playing the source you want to adjust.
-
In Properties, adjust the audio.
-
Use the Audio Level slider to set input audio level.
-
To mute the audio, select Mute Audio.
-
To restore audio, clear Mute Audio.
Muting sources from the wall editor
On the wall editor, you can mute and unmute the sources associated with the windows of your video wall.
- To mute audio, select .
- To unmute audio, select .
-
You can mute and unmute the S/PDIF audio output in CORIOgrapher.
Muting using audio properties
-
From the wall editor, select Audio > Mute Audio.
Muting the audio output from the wall editor
On the wall editor, the window playing audio shows .
- To mute the audio output, select .
- To hear the audio output, select .