CORIOmaster & CORIOgrapher Help
Configuring network settings for streaming media
If you want to stream media over your network, or from the internet, configure the network settings for your Streaming media and 4K playback input module.
If you only want to use your Streaming media and 4K playback input module to play media from a USB drive, you don't need to configure network settings.
You can also configure the network settings for your Encoder‑100.
Read about configuring your Encoder‑100
If you want to use a static IP address, you need some information about the range of available IP addresses on your network. Your network administrator should be able to help you.
Static IP address
If you choose a static IP address, make sure you enter a unique value for your IP address. Using the same IP address for multiple devices can cause your devices to disconnect. Contact your network administrator for help.
-
In CORIOgrapher, select > Module Configuration.
-
Find the Streaming media and 4K playback module that you want to set up, and select > Configure.
-
Choose an IP configuration.
- If you choose DHCP, an IP address is assigned to you.
- If you choose Static, the last static IP address you saved is available to edit. If you haven't previously saved a static IP address, default values for a static IP address are available to edit.
-
OPTIONAL: Configure your static IP address.
- Enter a value for your IP address and subnet mask.
- If you want to stream from the internet, for example from a Wowza server, enter a value for your gateway.
-
If you want to refer to a source by name, enter a value for DNS.
If you need help with network settings, contact your network administrator.
-
In CORIOgrapher, select > Module Configuration.
-
Find the Streaming media and 4K playback module that you want to set up, and select > Configure.
-
Read the MAC address.