CORIOmaster & CORIOgrapher Help
About your S/PDIF and analog audio module
You can use Phoenix connectors to connect to a range of audio inputs and outputs.
|
INPUTS, ANALOG |
Connect an analog audio device. |
|
INPUTS, S/PDIF |
Connect a digital audio device. |
|
OUTPUT 1 S/PDIF ANALOG |
Connect an analog or digital device to play audio from the video wall on canvas 1. |
|
OUTPUT 2 |
S/PDIF output. Connect a digital device to play audio from the video wall on canvas 2. |
|
OUTPUT 3 |
S/PDIF output. Connect a digital device to play audio from the video wall on canvas 3. |
|
OUTPUT 4 |
S/PDIF output. Connect a digital device to play audio from the video wall on canvas 4. |
|
STATUS(LED) |
Indicates the status of the module. Green means that the module is working correctly. Red means that there is a problem. |
If any status indicator stays red, restart your CORIOmaster. If that doesn't work, contact tvONE support. Contact links are at the bottom of this page.
Compatibility
Your S/PDIF and analog audio module is compatible with your CORIOmaster or CORIOmaster mini.
If you have a CORIOmaster micro, you cannot have an S/PDIF and analog audio module, but you can use the independent S/PDIF audio output.
Supported formats
The S/PDIF and analog audio module supports all audio formats with a frequency of 48 kHz.
Inputs
Your S/PDIF and analog audio module has two inputs, one analog and one digital input.
You can use inputs from the S/PDIF and analog audio module as breakaway audio only.
Breakaway audio is independent of the windows on your video wall. It doesn't change when the sources playing in your windows change. The audio is sent to all enabled outputs.
Outputs
Your S/PDIF and analog audio module has four outputs. Each output is locked to a canvas in the wall editor. Output 1 is locked to canvas 1, output 2 is locked to canvas 2, and so on.
Output 1 has one analog and one S/PDIF digital port. You can send the same output to both ports, but you cannot send a different output to each port. Because output 1 is locked to canvas 1, only canvas 1 is capable of sending both analog and digital audio.
To choose a canvas, use the selection tool in the bottom-left corner of Wall Editor. The image below shows canvas 1 is selected.
Outputs 2‑4 each have one digital S/PDIF output.